Search results

There's a chance it was over-filled? There are 2 separate hot and cold reservoir levels, have you checked both of them before driving (cold) and after driving (hot)?

Where on the passenger side? Toward the front end, up near the radiator? Or, further back, closer to the firewall?

Wife pointed out mine were dirty, too. I just snarled.... her with her new Tahoe and the mobile detailing service she has to come and clean it a couple times a month.... how dare she? But, I have given some thought to painting the inside of the freedom panels- anyone tried that?

So, when my fob got worn to the point it wouldn't work half the time, I simple ordered a key blank fob off Amazon, replaced the entire fob onto my old key and all is good. https://www.amazon.com/gp/product/B01BNPX4E4/?tag=jkforum-20

That same tag, near the oil fill plug, will say "LSD," as well as tell you what oil to use. If you're still unsure, just lift one wheel off the ground and see if it rotates (neutral, no e-brake) while the other is on the ground. The best way is to enter the VIN as shown in the post above. The...

Or just look on the rear side of the rear diff and see if there's a tag on the cover: Or enter your VIN : https://www.roughwheelers.com/wp-content/uploads/2019/09/jeep-vin-buildsheet.html

I did that about 10 days ago or so, lol. Took a back road to cut through an area too close to the Tar River and had to crawl through high water. Took about 5 seconds to remember the driver's side plug was in the console. Brings up a question for those who may have an answer... If I pull all...

Check this thread as well: https://wranglerjkforum.net/threads/door-leak.32014/#post-464932

My 2014 JKU hardtop doesn't have these. Your picture shows a hardtop as well, do you know if the vehicle was factory delivered with a hard or soft top?

A new JK starter is about $150.

I'm pretty sure that plastic sleeve is not supposed to be down around the bendix gear. When you turn the key, the bendix gear slides out and engages the flywheel. I believe that plastic sleeve is supposed to remain up inside. It looks like the flywheel has engaged the plastic. The entire bendix...

Your ball joints are shot. And if they're making that same noise while driving normally on a flat road surface, I would advise against driving the vehicle until you get them replaced. Understand, a bad ball joint, if left alone and not replaced, will ultimately result in breaking your front end...

I read on another forum the gauge cluster needs to recalibrated even if a refacing is done. I have no idea whether or not this is correct, but I'm just throwing it out there.

Let's not forget how many times we've heard of people changing multiple thermostats before finally getting one that functions as it should. If you have JScan, set up your phone so you can see it while you've got the hood up. Cold start your JKU and wrap your hand around the upper hose and...

The equipped scissor jack doesn't have enough to lift the Jeep. It does if I carry 4-5 2x10 pieces of lumber to stack it on.

I've been tossing around the idea of going "spareless" as well. As has been mentioned: 1. I do not have a hi-lift jack and I would need one with 35s and a 2.5" lift. 2. Putting the spare in the roof rack is not an option. The wheel (moto Metal 962 @ 35.4lbs) and tire (BFG TA KO2 @ 63lbs) make...

I've had this one for about 5 years and no issues... https://www.amazon.com/dp/B07BDFQDVJ?tag=jkforum-20 But, if you'd like, I'll see if I can find my OEM and would let you have it for $10 + shipping. And I'll ship it before payment if you like.

https://www.roadandtrack.com/news/a61438882/jeep-ducking-trend-founder-allison-parliament-dies/ Sad news: Allison Parliament, founder of the world-famous Jeep ducking craze, has passed away unexpectedly on June 22nd. Her mother confirmed her death on her Facebook page on June 25th. Parliament's...

I have an AEV Procal, practically new with the box and instructions. Came with my Jeep when I bought it. Not used it much at all except to check some settings when I first bought it. I started using JScan shortly after I purchased the Jeep and have been trying to get rid of the Procal.

I'm with ya at 68..... My dogs still take the occasional sniff, but that just lets me know they're still attached.