Search results

  1. 2

    Goodyear Duratracs vs Territory M/T

    Hello everyone, I need some new 35s on my wrangler before winter and I had the duratracs on it for around 5 years and they’ve been good but I found 2 almost new sets of tires one being the duratracs and one the territory’s on marketplace and was wondering which you would choose. The territory’s...
  2. 2

    ABS lights on cold start

    Yes all 3 lights come on, abs esp/bas traction control
  3. 2

    ABS lights on cold start

    I have three codes that pop up on cold start but disappear when I turn the car off and on again: c100a, c1011 and c102b. Sometimes when the lights are off and I'm braking the abs kicks on and starts fluttering the brakes. I was wondering if anyone has any ideas on how to fix this.
  4. 2

    3.8 coolant leak

    My water pump area is bone dry
  5. 2

    3.8 coolant leak

    whenever I park anywhere I find a puddle under the exact same spot under my draglink. Was wondering if anyone’s had the same issue before.
  6. 2

    ABS light on dash

    After checking all the codes these are what I got: c102B right rear wheel speed sensor circuit, U1418 implausible right wheel distance
  7. 2

    ABS light on dash

    I’ve checked the sensor wiring with a multimeter and it gets 12 volts when parked and on. I’ve also replaced the entire axle shaft assembly.
  8. 2

    ABS light on dash

    about last month I had an intermittent signal to right rear sensor and now it’s constant and the code says right rear sensor circuit but I’ve changed the sensor out 3 times and nothings changed. Any ideas on what it could be?
  9. 2

    Throwing ABS codes

    My jeep is throwing 3 codes: U1418 implausible right wheel distance signal, C102B Right rear wheel speed sensor circuit and C1032 right rear wheel speed sensor signal erratic performance. I changed my right rear sensor earlier this week and the lights come and go but when they come on they...
  10. 2

    Looking for a little advice

    I was luckily given my father's older 08 Wrangler that was already pretty done up, the issue with this is I don't want to waste what he has already done. With this, I found a fabricator on Google who said he could make my 2-step tire carrier into a 1-step carrier. When I went there for him to...
  11. 2

    Weird faint whirring noise past 60 km/h

    can anyone identify what the faint high pitched whirring/grinding noise in the video might be? The noise is more prominent after I let off the gas.
  12. 2

    Anyone know what this noise might be?

    It only makes the noise after 50/60 kmh and it’s a faint whining/grinding noise doesn’t matter how high I rev it. If you listen closely to the video after I let off the gas you can hear a quiet whining/grinding noise.
  13. 2

    Anyone know what this noise might be?

    I just drove it and didn’t hear it but I’ll keep everyone updated
  14. 2

    Anyone know what this noise might be?

    The only reason I’m skeptical of this is because I had changed all my u joints this summer
  15. 2

    Anyone know what this noise might be?

    It’s a rotational sound it’s similar to a high pitched whine but my exhaust covers the sound for the most part.
  16. 2

    What Rigid lights are these?

    I have some older Rigid USA lights that my dad put on the car before he handed the keys over and only some of the lights are working so I was wondering if anyone could help me identify them?
  17. 2

    How do I get this out?

    Yes it is
  18. 2

    How do I get this out?

    in a moment of desperation I cut off the drag link end connected to the steering box because it wouldn’t come off and now I’m sitting here after two days trying to get this same piece off. Any ideas would be very helpful
  19. 2

    How do I fix these wires?

    I was changing my drag link and my ratchet got pinched on these wires and cut them in half. How easy would it be to connect them again or if I could buy a wiring harness for them?
  20. 2

    How do I fix this leak?

    I’m in the middle of changing them right now and wondering do the seals need to be flush with the inside of the diff or is it supposed to have a slight edge on it?