Search results

I guess we need more info... @smokeyma48 if the OEM link is damaged or corroded to the point it can't be rotated it's a reasonable request from your installer. If they are saying you need something different than OEM I would question it.

There isn't enough adjustment with the OEM link? This is the kit I've been been looking at and it's the first I've heard of this requirement. Maybe it depends on model year, however?

Big modification today! 😂 Made some cinch straps for the soft top sail panels. I found that they tend to come loose if I run without the side windows and the rear window rolled up. I think the recommendation is to not go over ~35mph or so but I didn't like that. This config with the sun...

Stop it. Next, someone will ask about where to mount the rear wing.

I would like some Bushwackers without the bolt pockets. 😁

I have that same jack but use it as my shop jack. It is definitely hefty! I would say if you remove the spare and upgrade the tailgate hinges you could probably carry it on inside of the tailgate.

Depending how far forward the exhaust system is damaged, an O2 sensor could have been damaged (or wiring ripped out). That could also result in a misfire code.

Do it! 😁

I just re-read this. Do you already have larger tires than stock? If so, what size?

To your point - it seems as though plenty of people run 285/70R17 on OEM wheels without spacers. Bumping up to a 315 (12.5") width necessitates either a spacer or different wheel, regardless of diameter. In other words, you can probably get away with a larger pizza cutter on the OEM wheels...

You should do a leak down test too if you're going through the effort.

Welcome! There are quite a few knowledgeable 3.8 owners on here that should be able to point you in the right direction.

What about filter changes? Since it uses a typical filter it seems like it would difficult to not make a mess in that orientation. Edit: I see there is an air valve on the adapter so excess oil can be purged out of the filter before removal.

I can cut out another hunk of soft top if you want before I pitch what's left of it. The section I used was ~29"x54" and I can probably get another close to that. It doesn't have to be that big but I wanted something roughly the size of the felt I used so I can unroll the entire thing at once.

Made a roll for the soft top windows today... I had everything on hand to do it so, other than my time, cost was $0. I utilized the old soft top cover that came with the frame I purchased and was otherwise unusable. It fit the bill for an external cover in this application... I had some...

Totally understand. I had a bit of the reverse problem. I bought a crew cab f250 when I retired to tow our RV. We have also found that we preferred taking that on any longer trips/drives even without the RV. My wife loves it. She has an Escape as a DD and I wanted something smaller so...

Replacing with something else or just thinning the herd?

I was wondering too!! 😂

Good deal! We have a 55 with the ice maker, although it's kind of gimmicky and we never use it for that. We liked the size vs the lower volume offerings that weren't much less $$.

Installed the front hitch today... Unfortunately there is no way to reuse the front skid plate unless I get really creative.