Recent content by JeepJeezy

Are you able to "manually" shift it out of 3rd?

If they can get you one, I'd definitely do it while you're already there! I did mine 2 years ago, this was pre-3.6 tick 😒

That's where I was going too. My buddy did that with his 99 WJ. Put a whole bottle of that Lucas stuff in it before he sold it and you'd never known it had a knock.

I have a couple of thoughts/questions. 1. Years ago when I was into big speakers, big amplifiers, and dual battery setups, I used to install a smaller pully on my alternator to get more charging at idle instead of 2,200 RPMs. 2. Remember, depending on distance from OEM battery to DC-DC...

Is this the 1st time changing the oil since you've owned it?

Had a few more minutes to work on the Jeep's solar today. I wired in and mounted my USB-A & USB-C charging port in the rear. I also did some more testing on my trickle charger system that backfeeds through the rear 12v port I add in. On Tuesday I tested the Jeep battery and got a reading of...

Wait! $4,400!? That's it?! I just got a quote to fix my tick, tick, tick, for $5,600!

I would still double check plugs. There's plenty of times I've had plugs from aftermarket fog lights to head lights and more and the damn plugs were wired wrong. Some other food for thought. 1. What ohms are your new speakers rated for? 2. Are all your speakers rated the same ohm? 3. Your...

Between work, a dog with Epilepsy and some other things, I've been very very slowly building my solar charge station on and in the Jeep. So far I have added a half roof rack from  Calliert, a Renogy 175w solar panel, Renogy 30w Wanderer charge controller, Renogy BT-1 module and a 1,280wh LiPo...

I have a couple of questions. I know you said everything else is factory but.... 1. Is your head unit factory or aftermarket? 2. Are you 100% sure you did not mix polarity on any of the speaker? 3. By streaming, do you mean Bluetooth from your phone or like Sirius from the radio?

If I remember correctly, her OEM size should be 255/70R18. You're good to go!

I'm running 37's at 28 psi. When I mounted them to my beadlocks, I threw in bags of balance beads. That was a few years ago. All my tires are still balanced and wearing evenly. Just food for thought.

I like Eastwood products! POR15 has worked wonders for me in the past. @Jayc4929 Can you remove the undercoating? That's the worst thing to do to your underside. It traps moisture and promotes rust underneath it. Before it gets cold out, I pressure wash the whole underside, let it dry, they...

Ouch. I see you're from NY. I'm betting my paychecks money that's not your only spot in really bad shape. As far as repairs, are you looking to repair yourself or have a shop make the repairs?

Nothing makes them happy other than handing out tickets and court dates.