Recent content by chrispeel2001

I have a fuel leak. There's a fuel line that goes from the main line to the injector rail. The line is about a foot or so long. The leak is where it connects to the main line. I've been lookinh for a replacement for the short line but haven't had any luck. Any suggestions?

They didn't mention the steering stabilizer, I don't have one. Lol. The great thing about owning a Jeep is I've learned how to do so much work on it myself, lol.

I went to a Jeep/Chrysler dealer today for 3 recalls I had outstanding. It was for the clockspring, air bag, and Mopar tow bar. When I picked it up the service manager told me the horn still didn't work. He claimed it didnt work when ai brought it in. I know it did work. My guess is they...

My driveway is in an incline and I thought that would be enough but I'll try raising the jeep up like you mentioned. Thanks

You assume correctly

I replaced the heater core and I have flushed the coolant system and still no heat, its just blowing ambient air. Any thoughts on what else it could be. I'd really like to have this fixed before winter hits.

I had a similar problem. My 2007 jk wouldn't start intermittently for a year or so. I would shift into neutral and that would do it. Then recently it started doing this every time I tried to start the engine and the neutral trick stopped working. I saw a post in a different forum about a...

I have a 2007 JK and this has been happening to me intermittently for a year or so. Recently it started happening every time I tried to start the Jeep. I saw a post in another forum with a solution I hadn't seen before. Get a 4-0 Guage wire, connect it to the negative post on the battery and...

Got it seated finally. I was using the wrong collar for the bj press. Once I used the correct one it went in the rest of the way. Thank you for responding!

Replacing ball joints. I got the lower one in all the way but the upper one won't seat all the way. Not sure what to do. Any suggestions?

Could this be the culprit for my death wobble? I lifted the tires and the don't budge, so ball joints are good I guess. Any thoughts?

Got it figured out. I decided to pull out all the wires and look over them. I finally noticed a wire had come disconnected from some kind of small junction box. I reconnected it and lights were all working. Thanks for the tips everyone

Standard bulb

Got the quick flash on my turn signal. Turns out the rear turn signal bulb was burnt out. I replaced the bulb with a new one and it still doesn't come on. I replaced that bulb and still no turn signal. The bulb lights up when I turn the lights on. I also found out the same bulb isn't...

The damn misfire is back, with? It's the only code P0300. I've changed the spark plugs and wires. It's not the o2 sensors. When I start her up she misfires, but once I've been driving for about 10 minutes or so it stops and drives like normal.